Item No: 5685

ITW Vertical Visuals' Roller Kite

One of kiteflying’s best kept secrets
See all items from Into The Wind
Product Description

ITW Vertical Visuals' Roller Kite
One of kiteflying's best kept secrets. Remarkably fun in light winds, Vertical Visuals' Roller climbs steeply when you take line in and glides out gently when you let line out, so you can pump it up to better wind. Sensitive to line control, it's maneuverable, like a big, slow fighter kite that can fly steady. Made of ripstop nylon with wood spars used because flight tests determined that wood resulted in the best flight characteristics for the kite. 3'-6" x 3'-9". 45" case (This product has a shipping length greater than 42" and can not be shipped to most international addresses). Wind range: 4 to 20 mph. Less with practice. Use 75-lb. Dacron line. Instructions included in the inside front pocket of case.

Product Specifications
Skill Level: Intermediate
Minimum Wind Speed: 4
Maximum Wind Speed: 20
Will from New yorki Submitted: 4/4/2018
Product Rating brightstarbrightstarbrightstarbrightstardullstar
verified
Subject
Nice kite
Product Rating
What is your opinion of this product?
This is a nice kite,easy to fly. I have a chocolate roller and the itw vertical visuals roller flys just as well.
separator
Pcalexan Submitted: 11/1/2015
Product Rating brightstarbrightstarbrightstardullstardullstar

Subject
This comes without a scrap of assembly instructions
What is your opinion of this product?
I didn't think there were any instructions either, but when I took the kite out of the case the second time, I realized there's a pocket inside the case and the assembly instructions were in the pocket. \ \ I haven't had a chance to fly the kite yet, so I can't comment on that.
separator
ttonycollins Submitted: 11/1/2015
Product Rating brightstarbrightstarbrightstarbrightstarbrightstar

Subject
Brilliant kite
What is your opinion of this product?
This comes without a scrap of assembly instructions. All the spars are wooden. BE SURE to seat the cross dowels all the way in the plastic dihedrals. If you do not, you will snap the center spine on first assembly. (3/8 x 43-1/2" dowel) It comes with a over-the-top heavy duty case. If they would send it with a simple rip-stop sleeve for a case and spend the money on a fiberglass tube center spine it would be an improvement. After I rebuild it I sure hope it actually flies.
separator
Discussions
Currently there are no discussions available for this item.
Customers who bought this item also bought
ITW Scintillation Kite
ITW Scintillation Kite
Price: $99.00
Price: $59.00
In Stock! Order within 1 hour 41 minutes and your order ships today!